Question: How To Make A Burlap Wreath With A Hanger?

How do you make a rag wreath with a wire hanger?


  1. Cut your fabric into 2 inch by 6 inch strips.
  2. Bend and shape the wire hanger into a circle. The hook makes a perfect wreath hanger.
  3. Tie the fabric strips onto the hanger.
  4. Put in a movie and tie, tie, tie!
  5. Continue to tie and scrunch the fabric together until the wreath is as full as you like it.

How many yards does it take to make a burlap wreath?

For the wreath in this tutorial, it takes 1 1/2 yards of burlap from a bolt of burlap. If you are making a ruffled burlap wreath on a 16-inch wire wreath frame use a 5-inch roll of burlap. It should take about 12-15 yards, depending on how full you want the wreath. Typically one roll is 10 yards.

What can I do with plastic coat hangers?

If you don’t need them they can often be donated to charity shops who will use them again or some retailers who will recycle them. If they are broken try contacting your local council as local recycling centres have recycling containers for wood, metal and plastic where they could be recycled.

You might be interested:  Quick Answer: How To Make An Inexpensive Halloween Wreath?

What can you make with plastic coat hangers?

  • DIY Neon Nonslip Hangers.
  • Repurposed Wire Hanger Book Holder.
  • Repurposed Wooden Hanger Dish Drainer.
  • Repurposed Wire Hanger Wreath.
  • Upcycled Wire Hanger Entryway Holder.
  • DIY Flip Flop Organizer.
  • Upcycled Wire Hanger Topiary.
  • Upcycled Wooden Hanger Chandelier.

How much material does it take to make a rag wreath?

Depending on the size of the wreath form, this project needs about 2.5 yards of fabric. This one was 14 inches and I decided to get. 5 yards of each color. I had a little extra left, so if you use a 16in wreath form or larger, you might want to get just a little more fabric.

How do you make an easy rag wreath?

Steps in making a rag wreath:

  1. Step 1: Using scissors, cut your strips of fabric. Your measurements do not need to be exact nor do your cuts.
  2. Step 3: Place your wire wreath form on your work surface.
  3. Look!
  4. Here you can see the combination of fabrics a little better.
  5. Such a fun, inexpensive, early fall craft.

How many feet of burlap do you need for a wreath?

What you need: 60 feet of 5″ wide burlap ribbon or garland (20 yards) — NOTE: If you’re making more than one wreath, you can also get a 4-pack of burlap ribbon rolls (40 yards or 120 feet ) or a 6-pack of rolls (60 yards or 180 feet ) at a discounted rate.

How do you make a burlap wreath out of zip ties?

DIY Burlap Wreath Instructions

  1. Using a zip tie, attach the burlap to the wire wreath form on the inner ring at a cross bar.
  2. Push the burlap into each section of the form creating about a 3 inch poof.
  3. Continue making the poofs till the form is as full as you like.
  4. Cut the burlap off and secure with a zip tie.

Leave a Reply

Your email address will not be published. Required fields are marked *